Design a rimless, euro-brace, magnetic or suction-cup reef aquarium holder for pH/ORP/temp probes, dosing tubes, hoses and ATO sensors. Print in PETG or ASA.
Features
- Clip-over (set screw or nut pocket), sealed magnet, or suction-cup mount
- Supports rimless and euro-braced glass from 6 to 19 mm thick
- 1 to 8 mixed slots in a straight row or staggered layout
- Per-slot probe friction ribs, cable slits, drip-loop hooks and hose snap rings
- Embossed or debossed slot labels up to 8 characters
- Live readouts for width, glass fit range, waterline clearance and print mass
What people make with it
- Hold pH, ORP and temperature probes neatly in a sump or display tank
- Route 4 mm or 6 mm rigid dosing lines with anti-siphon raised outlets
- Combine an adjustable ATO optical or float sensor with probes
- Clamp 10-32 mm drain or return hoses securely to the tank rim
How to use
- Measure your glass thickness and choose rimless or euro-brace.
- Pick clip-over, sealed magnet, or suction-cup mounting.
- Configure 1 to 8 slots for probes, dosing lines, hoses or ATO sensors.
- Check waterline clearance and print in PETG or ASA.
Materials
- PETG: recommended — Reef-safe, durable in saltwater.
- ASA: works — Reef-safe and UV-resistant.
- PLA: not suitable — Degrades in warm saltwater; fit-check only.
Presets
Frequently asked questions
Which filament is safe inside a saltwater reef tank?
Use PETG or ASA only. PLA degrades in saltwater and standard resin can leach chemicals.
Are the magnets sealed from saltwater?
Yes. Magnet pockets are always fully enclosed inside the print; pause at the reported Z height to insert the magnet.
How does the anti-siphon check work?
Set your waterline drop below the rim. The generator calculates dosing outlet height above the waterline and warns if any outlet sits below it.
For AI agents and developers: API v1, schema.json, index.md. Open-source licences