# Reef probe & dosing holder

Design a rimless, euro-brace, magnetic or suction-cup reef aquarium holder for pH/ORP/temp probes, dosing tubes, hoses and ATO sensors. Print in PETG or ASA.

- Page: https://paramlet.com/tools/reef-probe-holder/
- Tool id: `reef-probe-holder` · version 0.1.0 · Paramlet Module Spec 1.1 · API version 1 · docs: https://paramlet.com/agents/
- Category: aquarium / equipment-holders · status: beta
- Parameter schema (JSON Schema): https://paramlet.com/tools/reef-probe-holder/schema.json · presets: https://paramlet.com/tools/reef-probe-holder/presets.json
- Core parameters (`exportFormat`, `exportTol`, `units`) are in schema.json under `x-coreParams`, not `properties`; both are accepted.
- Presets: `probes-3-10mm` (3-probe pH/ORP/temp (10 mm)), `doser-4-12mm` (4-line doser (12 mm)), `ato-probe-combo` (ATO + probe combo), `hose-2-6mm` (2-hose return/drain (6 mm)), `magnetic-3-probe` (Magnetic 3-probe). Each has a page: https://paramlet.com/tools/reef-probe-holder/probes-3-10mm/, https://paramlet.com/tools/reef-probe-holder/doser-4-12mm/, https://paramlet.com/tools/reef-probe-holder/ato-probe-combo/, https://paramlet.com/tools/reef-probe-holder/hose-2-6mm/, https://paramlet.com/tools/reef-probe-holder/magnetic-3-probe/
- Deep link with parameters: `https://paramlet.com/tools/reef-probe-holder/?p=<url-encoded JSON>` or single values `?key=value`
- Deep link with a project: `https://paramlet.com/tools/reef-probe-holder/#project=<base64url project JSON>` (8,000 characters max)
- In the page: `window.paramlet` (getSchema, getParams, getState, setParams, loadProject, getProject, exportModel, exportSTL, export3MF).
- WebMCP tools: `reef_probe_holder_get_parameter_schema`, `_get_state`, `_set_parameters`, `_load_project`, `_download`.
- Validation: unknown keys and out-of-range values are rejected; nothing is applied from an invalid request. Keys with x-agentSafe false can only be changed in the page.
- Output: 3mf, stl (default 3mf), millimetres, parts lying on the bed in print orientation. Every download contains README.txt and parameters.json (a project file).
- Downloads: free and unlimited at launch; API exports use the same download path as the button, including a short page with recommended products (affiliate links) that the user closes before the file starts.
- Export types: `3mf`, `stl`.

## Features

- Clip-over (set screw or nut pocket), sealed magnet, or suction-cup mount
- Supports rimless and euro-braced glass from 6 to 19 mm thick
- 1 to 8 mixed slots in a straight row or staggered layout
- Per-slot probe friction ribs, cable slits, drip-loop hooks and hose snap rings
- Embossed or debossed slot labels up to 8 characters
- Live readouts for width, glass fit range, waterline clearance and print mass

## Use cases

- Hold pH, ORP and temperature probes neatly in a sump or display tank
- Route 4 mm or 6 mm rigid dosing lines with anti-siphon raised outlets
- Combine an adjustable ATO optical or float sensor with probes
- Clamp 10-32 mm drain or return hoses securely to the tank rim

## Safety

- Print in PETG or ASA only; PLA is not safe for long-term saltwater immersion.
- Magnets must remain fully sealed inside the plastic; exposed neodymium magnets corrode rapidly and leach metals.
- Keep dosing line outlets above the waterline to prevent back-siphoning and tank flooding.
- Rinse finished parts in RO/DI water before placing them in the aquarium.

## FAQ

**Which filament is safe inside a saltwater reef tank?**
Use PETG or ASA only. PLA degrades in saltwater and standard resin can leach chemicals.

**Are the magnets sealed from saltwater?**
Yes. Magnet pockets are always fully enclosed inside the print; pause at the reported Z height to insert the magnet.

**How does the anti-siphon check work?**
Set your waterline drop below the rim. The generator calculates dosing outlet height above the waterline and warns if any outlet sits below it.

## Parameters

| key | label | type | range / values | default | agents |
|---|---|---|---|---|---|
| `mountType` | Mount type | string | clip-screw|clip-nut|magnet|suction | "clip-screw" | yes |
| `glassThickness` | Glass thickness | number | 6–19 mm (step 0.5) | 10 | yes |
| `rimStyle` | Rim style | string | rimless|eurobrace | "rimless" | yes |
| `euroLipWidth` | Euro-brace lip width | number | 10–60 mm (step 1) | 25 | yes |
| `euroLipThickness` | Euro-brace thickness | number | 6–19 mm (step 0.5) | 10 | yes |
| `clipDrop` | Clip drop below rim | number | 10–60 mm (step 1) | 20 | yes |
| `screwDiameter` | Set screw diameter | number | 3–8 mm (step 0.5) | 4 | yes |
| `magnetDiameter` | Magnet diameter | number | 10–30 mm (step 0.5) | 20 | yes |
| `magnetHeight` | Magnet thickness | number | 2–10 mm (step 0.5) | 5 | yes |
| `magnetCount` | Sealed magnets | integer | 1–3 count (step 1) | 2 | yes |
| `magnetSealWall` | Magnet seal wall | number | 1.2–4 mm (step 0.2) | 1.6 | yes |
| `suctionBossDiameter` | Suction boss diameter | number | 6–16 mm (step 0.5) | 10 | yes |
| `suctionStemDiameter` | Suction stem diameter | number | 3–8 mm (step 0.5) | 5 | yes |
| `waterlineDrop` | Waterline below rim | number | 5–80 mm (step 1) | 25 | yes |
| `layout` | Slot layout | string | row|staggered | "row" | yes |
| `slotSpacing` | Slot spacing | number | 16–50 mm (step 1) | 24 | yes |
| `slots` | Slot | array | array | [{"kind":"probe","diameter":12.5,"probeRibs":true,"cableSlit":false,"dosingRaise":12,"dripLoopHook":true,"atoTravel":24,"label":"PH"},{"kind":"probe","diameter":12.5,"probeRibs":true,"cableSlit":false,"dosingRaise":12,"dripLoopHook":true,"atoTravel":24,"label":"ORP"},{"kind":"probe","diameter":8,"probeRibs":true,"cableSlit":true,"dosingRaise":12,"dripLoopHook":true,"atoTravel":24,"label":"TEMP"}] | yes |
| `wallThickness` | Wall thickness | number | 1.2–6 mm (step 0.2) | 3.2 | yes |
| `holderHeight` | Holder thickness / height | number | 12–40 mm (step 1) | 20 | yes |
| `labelStyle` | Slot label style | string | none|embossed|debossed | "embossed" | yes |
| `clearance` | Fit clearance | number | 0.1–1.2 mm (step 0.05) | 0.35 | yes |
| `printMaterial` | Print material | string | petg|asa|pla | "petg" | yes |
| `resolution` | Resolution | integer | 16–72 count (step 4) | 36 | yes |
| `color` | Preview colour | string | string | "#1f7a8c" | yes |
