Design a flat or hybrid method feeder that hits your target weight with sealed steel or tungsten balls and a matching bait mould.
Features
- Flat or hybrid feeder body, sizes S/M/L, every dimension adjustable
- Target weight in grams: the solver picks the steel, stainless, tungsten or brass balls and shows the BOM
- Weights sealed inside the base with a print pause written into the 3MF (PrusaSlicer, Bambu Studio, OrcaSlicer)
- Matching bait mould generated from the feeder bed, always fits, with draft on every wall
- Fish-safe straight inline tube sized to your main line, with rounded line entries
- Lead-free by default; all weights are 100% lead-free (steel, stainless, tungsten, brass)
What people make with it
- Print a method feeder that hits your target weight on a 0.1 g scale
- Switch to lead-free weights (EU Regulation 2026/2501) with steel or tungsten balls
- Press groundbait into the matching mould so it always fits the feeder
- Make a hybrid feeder with side walls for a more stable cast
- Build a small, medium or large feeder from one generator
How to use
- Pick flat or hybrid and a size preset.
- Set the target weight and the weight material.
- Download the 3MF and print the feeder in PETG; print the mould in TPU or PETG.
- When the printer pauses, drop in the balls from the BOM and resume.
- Pack groundbait into the mould, press the feeder in, cast.
Materials
- PETG: recommended
- ASA: works
- TPU: recommended — For the bait mould part.
- PLA: fit check only — Brittle in water.
Presets
- Flat S — 20 g — Small flat feeder for close work, 20 g target.
- Flat M — 30 g — Medium flat feeder, 30 g target, the common size.
- Flat L — 50 g — Large flat feeder for distance, 50 g target with steel.
- Hybrid M — 30 g — Medium hybrid with side walls for a stable cast, 30 g target.
- Flat L — 50 g (tungsten) — Tungsten balls fit in a smaller cavity; for distance with less drag.
- Hybrid L — 45 g — Large hybrid feeder with raised side walls for deep water and long casting.
Frequently asked questions
Is it free?
Yes, with no account. A short page with recommended materials and weights may be shown before a download.
Why not lead?
Steel is the default. The EU is phasing out lead in fishing tackle (Regulation (EU) 2026/2501, in force 3 Dec 2026). Steel, stainless or tungsten balls sealed in the base work just as well.
How exact is the weight?
Within ±0.5 g or ±2 %, whichever is larger, once you enter the printed plastic weight from your slicer or scale. The BOM lists the exact balls and any tungsten-putty trim.
How does the weight get inside?
Choose a print pause (default): the cavity prints open, the slicer pauses at the layer shown, you drop in the balls and resume, and the roof closes over them. An open-epoxy cavity and a heat-set screw base are also available.
Does the mould always fit?
Yes. The mould is generated from the feeder bed, offset by the clearance you set, with draft on every wall, so the groundbait takes the exact shape of the feeder and releases cleanly.
Is it fish-safe?
The inline tube is straight, smooth and sized to your main line plus a knot and 0.5 mm. If the main line breaks, the feeder slides off the line. The README states the safe-rig rule.
Are my designs uploaded?
No. The geometry is computed in your browser; settings and photos stay on your device.
Related generators
For AI agents and developers: API v1, schema.json, index.md. Open-source licences