# Method feeder generator

Design a flat or hybrid method feeder that hits your target weight with sealed steel or tungsten balls and a matching bait mould.

- Page: https://paramlet.com/tools/method-feeder/
- Tool id: `method-feeder` · version 0.1.0 · Paramlet Module Spec 1.1 · API version 1 · docs: https://paramlet.com/agents/
- Category: fishing / feeders · status: beta
- Parameter schema (JSON Schema): https://paramlet.com/tools/method-feeder/schema.json · presets: https://paramlet.com/tools/method-feeder/presets.json
- Core parameters (`exportFormat`, `exportTol`, `units`) are in schema.json under `x-coreParams`, not `properties`; both are accepted.
- Presets: `flat-s-20` (Flat S — 20 g), `flat-m-30` (Flat M — 30 g), `flat-l-50` (Flat L — 50 g), `hybrid-m-30` (Hybrid M — 30 g), `flat-l-50-tungsten` (Flat L — 50 g (tungsten)), `hybrid-l-45` (Hybrid L — 45 g). Each has a page: https://paramlet.com/tools/method-feeder/flat-s-20/, https://paramlet.com/tools/method-feeder/flat-m-30/, https://paramlet.com/tools/method-feeder/flat-l-50/, https://paramlet.com/tools/method-feeder/hybrid-m-30/, https://paramlet.com/tools/method-feeder/flat-l-50-tungsten/, https://paramlet.com/tools/method-feeder/hybrid-l-45/
- Deep link with parameters: `https://paramlet.com/tools/method-feeder/?p=<url-encoded JSON>` or single values `?key=value`
- Deep link with a project: `https://paramlet.com/tools/method-feeder/#project=<base64url project JSON>` (8,000 characters max)
- In the page: `window.paramlet` (getSchema, getParams, getState, setParams, loadProject, getProject, exportModel, exportSTL, export3MF).
- WebMCP tools: `method_feeder_get_parameter_schema`, `_get_state`, `_set_parameters`, `_load_project`, `_download`.
- Validation: unknown keys and out-of-range values are rejected; nothing is applied from an invalid request. Keys with x-agentSafe false can only be changed in the page.
- Output: 3mf, stl (default 3mf), millimetres, parts lying on the bed in print orientation. Every download contains README.txt and parameters.json (a project file).
- Downloads: free and unlimited at launch; API exports use the same download path as the button, including a short page with recommended products (affiliate links) that the user closes before the file starts.
- Export types: `3mf`, `stl`; planned: `master`.

## Features

- Flat or hybrid feeder body, sizes S/M/L, every dimension adjustable
- Target weight in grams: the solver picks the steel, stainless, tungsten or brass balls and shows the BOM
- Weights sealed inside the base with a print pause written into the 3MF (PrusaSlicer, Bambu Studio, OrcaSlicer)
- Matching bait mould generated from the feeder bed, always fits, with draft on every wall
- Fish-safe straight inline tube sized to your main line, with rounded line entries
- Lead-free by default; all weights are 100% lead-free (steel, stainless, tungsten, brass)

## Use cases

- Print a method feeder that hits your target weight on a 0.1 g scale
- Switch to lead-free weights (EU Regulation 2026/2501) with steel or tungsten balls
- Press groundbait into the matching mould so it always fits the feeder
- Make a hybrid feeder with side walls for a more stable cast
- Build a small, medium or large feeder from one generator

## Safety

- Print the feeder in PETG. PLA becomes brittle in water and is only good for a fit check. Print the mould in TPU (flexible) or PETG.
- Steel balls rust if the cavity leaks. Print at least 4 walls and 100 % infill around the cavity, and seal the cavity after inserting the balls. Stainless (AISI 420/440) balls do not rust.
- All weights are 100% lead-free (EU Regulation 2026/2501). Fishing designs never use lead.
- If the main line breaks, the feeder must be able to slide off the line. The README states the safe-rig rule: keep the line diameter at or below the value set in the tool, and tie the rig so the feeder slides off.

## FAQ

**Is it free?**
Yes, with no account. A short page with recommended materials and weights may be shown before a download.

**Why not lead?**
Steel is the default. The EU is phasing out lead in fishing tackle (Regulation (EU) 2026/2501, in force 3 Dec 2026). Steel, stainless or tungsten balls sealed in the base work just as well.

**How exact is the weight?**
Within ±0.5 g or ±2 %, whichever is larger, once you enter the printed plastic weight from your slicer or scale. The BOM lists the exact balls and any tungsten-putty trim.

**How does the weight get inside?**
Choose a print pause (default): the cavity prints open, the slicer pauses at the layer shown, you drop in the balls and resume, and the roof closes over them. An open-epoxy cavity and a heat-set screw base are also available.

**Does the mould always fit?**
Yes. The mould is generated from the feeder bed, offset by the clearance you set, with draft on every wall, so the groundbait takes the exact shape of the feeder and releases cleanly.

**Is it fish-safe?**
The inline tube is straight, smooth and sized to your main line plus a knot and 0.5 mm. If the main line breaks, the feeder slides off the line. The README states the safe-rig rule.

**Are my designs uploaded?**
No. The geometry is computed in your browser; settings and photos stay on your device.

## Parameters

| key | label | type | range / values | default | agents |
|---|---|---|---|---|---|
| `variant` | Type | string | flat|hybrid | "flat" | yes |
| `size` | Size | string | S|M|L | "M" | yes |
| `length` | Length | number | 30–70 mm (step 0.5) | 48 | yes |
| `width` | Width | number | 20–45 mm (step 0.5) | 32 | yes |
| `baseHeight` | Base height | number | 4–18 mm (step 0.2) | 14 | yes |
| `noseAngle` | Nose slope | number | 10–45 deg (step 1) | 25 | yes |
| `chamfer` | Edge chamfer | number | 0–3 mm (step 0.1) | 0.8 | yes |
| `hybridWall` | Side wall height | number | 4–16 mm (step 0.2) | 10 | yes |
| `ribCount` | Number of ribs | integer | 2–8 count (step 1) | 4 | yes |
| `ribHeight` | Rib height | number | 3–14 mm (step 0.2) | 8 | yes |
| `ribWidth` | Rib thickness | number | 1.2–3 mm (step 0.1) | 1.6 | yes |
| `lineDiameter` | Main line diameter | number | 0.15–0.6 mm (step 0.01) | 0.3 | yes |
| `tubeBore` | Tube bore | number | 2–5 mm (step 0.1) | 3 | yes |
| `tubeEntryRadius` | Tube entry rounding | number | 1–2.5 mm (step 0.1) | 1.2 | yes |
| `tubeWall` | Tube wall thickness | number | 1–3 mm (step 0.1) | 1.4 | yes |
| `targetMass` | Target weight | number | 10–80 g (step 1) | 30 | yes |
| `insertMaterial` | Weight material | string | steel|stainless|tungsten|brass | "steel" | yes |
| `allowPutty` | Trim with tungsten putty | integer | 0|1 | 1 | yes |
| `insertClearance` | Cavity clearance | number | 0.1–0.6 mm (step 0.05) | 0.2 | yes |
| `insertMethod` | How the weight goes in | string | pause|open-epoxy|screw-base | "pause" | yes |
| `massCalibration` | Printed plastic weight (from slicer or scale) | number | 0–200 g (step 0.1) | 0 | yes |
| `baitDensity` | Bait density | number | 0.8–1.5 gcm3 (step 0.05) | 1.2 | yes |
| `mouldEnabled` | Generate the bait mould | integer | 0|1 | 1 | yes |
| `mouldClearance` | Mould clearance | number | 0.2–1.5 mm (step 0.05) | 0.5 | yes |
| `mouldDraft` | Mould draft | number | 5–15 deg (step 0.5) | 6 | yes |
| `mouldWall` | Mould wall | number | 3–12 mm (step 0.5) | 6 | yes |
| `mouldResolution` | Mould resolution | integer | 24–96 count (step 4) | 48 | yes |
| `printMaterial` | Feeder plastic | string | petg|asa|pla | "petg" | yes |
| `layerHeight` | Layer height | number | 0.08–0.32 mm (step 0.01) | 0.2 | yes |
| `firstLayerHeight` | First layer height | number | 0.1–0.35 mm (step 0.01) | 0.2 | yes |
| `wallCount` | Walls | integer | 4–10 count (step 1) | 4 | yes |
| `infill` | Infill | number | 15–100 pct (step 5) | 100 | yes |
| `resolution` | Resolution | integer | 24–96 count (step 4) | 48 | yes |
| `color` | Preview colour | string | string | "#3b82f6" | page only |
