Design glass or acrylic reef sump baffles with bubble traps, filter-sock plates, overflow combs, DXF/SVG cut sheets, and power-off flood checks.
Features
- Over-under-over bubble trap plus optional refugium baffle
- 1:1 mm DXF and SVG cut templates included in every download
- Configurable 1 to 3 filter-sock plate for 4-inch or 7-inch rings
- Parametric bubble/overflow comb with rim-clip or sealed-magnet mount
- Automatic lap-joint splitting for 3D-printed parts over 256 mm
- Live chamber volumes (L), PETG print mass (g), and power-off flood check
What people make with it
- Lay out an over-under-over bubble trap for a DIY glass or acrylic reef sump
- Export 1:1 mm DXF and SVG cut sheets for a glass shop or laser cutter
- 3D print a PETG filter-sock holder plate (4-inch or 7-inch) and surface-skimming comb
- Verify sump reserve volume against display-tank power-off drain-back before gluing baffles
How to use
- Measure the inside length, width, and height of your sump tank in millimetres.
- Pick a generic preset (60, 80, or 100 cm) or tune chamber lengths and baffle heights.
- Enter your display tank footprint and siphon drain-drop height to verify flood safety.
- Configure the filter-sock plate and bubble comb, then download 3MF/STL with DXF and SVG cut templates.
Materials
- PETG: recommended — Reef-safe in saltwater; print with 3+ walls.
- ASA: works — Durable in saltwater; ventilate when printing.
- PLA: not suitable — Degrades and softens in warm saltwater.
Presets
- Small sump (60 cm) — 600 x 300 x 350 mm inner sump, single 4-inch filter sock, bubble trap, no refugium.
- Medium sump (80 cm) — 800 x 350 x 400 mm inner sump, dual 4-inch filter socks, bubble trap, and refugium.
- Large sump (100 cm) — 1000 x 450 x 450 mm inner sump, dual 7-inch filter socks, bubble trap, and large refugium.
- Nano cube (40 cm) — 400 x 300 x 300 mm nano sump, single 4-inch filter sock, 2-stage compact chamber.
- Triton refugium (120 cm) — 1200 x 500 x 450 mm large sump with high-flow algae refugium and dual 7-inch filter socks.
Frequently asked questions
Which filament is safe inside a saltwater sump?
Use PETG or ASA for submerged parts. Avoid PLA and standard resin, which degrade or soften in saltwater.
How are the 2D DXF and SVG templates delivered?
Until core 1.1 ships dedicated 2D export, both sump-baffles.dxf and sump-baffles.svg are bundled inside the 3MF/ZIP download at 1:1 millimetre scale.
What if my sump width exceeds a 256 mm print bed?
DXF and SVG templates are always emitted full-size for glass or acrylic cutting. Printed PETG plates longer than 240 mm are automatically split into interlocking half-lap sections that fit a 256 mm bed.
Are magnets safe in a reef sump?
Only when completely sealed inside the PETG print or waterproofed in reef-safe epoxy. Never expose bare neodymium magnets to saltwater.
For AI agents and developers: API v1, schema.json, index.md. Open-source licences