# Flower pot generator

Design a printable flower pot or planter with taper, twist, ribs and an optional saucer. Drainage holes and feet are baked in and the soil volume is shown.

- Page: https://paramlet.com/tools/flower-pot/
- Tool id: `flower-pot` · version 0.1.0 · Paramlet Module Spec 1.1 · API version 1 · docs: https://paramlet.com/agents/
- Category: home / planters · status: beta
- Parameter schema (JSON Schema): https://paramlet.com/tools/flower-pot/schema.json · presets: https://paramlet.com/tools/flower-pot/presets.json
- Core parameters (`exportFormat`, `exportTol`, `units`) are in schema.json under `x-coreParams`, not `properties`; both are accepted.
- Presets: `succulent-small` (Succulent, small), `herb-pot-12cm` (Herb pot, 12 cm), `self-standing-18cm-saucer` (Self-standing 18 cm with saucer), `twisted-hex-vase` (Twisted hex vase), `ribbed-modern` (Ribbed modern). Each has a page: https://paramlet.com/tools/flower-pot/succulent-small/, https://paramlet.com/tools/flower-pot/herb-pot-12cm/, https://paramlet.com/tools/flower-pot/self-standing-18cm-saucer/, https://paramlet.com/tools/flower-pot/twisted-hex-vase/, https://paramlet.com/tools/flower-pot/ribbed-modern/
- Deep link with parameters: `https://paramlet.com/tools/flower-pot/?p=<url-encoded JSON>` or single values `?key=value`
- Deep link with a project: `https://paramlet.com/tools/flower-pot/#project=<base64url project JSON>` (8,000 characters max)
- In the page: `window.paramlet` (getSchema, getParams, getState, setParams, loadProject, getProject, exportModel, exportSTL, export3MF).
- WebMCP tools: `flower_pot_get_parameter_schema`, `_get_state`, `_set_parameters`, `_load_project`, `_download`.
- Validation: unknown keys and out-of-range values are rejected; nothing is applied from an invalid request. Keys with x-agentSafe false can only be changed in the page.
- Output: 3mf, stl (default 3mf), millimetres, parts lying on the bed in print orientation. Every download contains README.txt and parameters.json (a project file).
- Downloads: free and unlimited at launch; API exports use the same download path as the button, including a short page with recommended products (affiliate links) that the user closes before the file starts.
- Export types: `3mf`, `stl`.

## Features

- Round, square, hexagon, octagon or any n-sided polygon
- Taper, twist and vertical fluting or ribs
- Drainage holes, optional centre hole and optional feet
- Matching saucer as a separate part
- Soil volume in litres and estimated print mass shown before you print

## Use cases

- Print a small succulent pot that fits a 60 mm saucer
- Make a 12 cm herb pot for the kitchen windowsill
- Self-standing 18 cm planter with matching drip tray
- Twisted hex vase-style pot for a statement plant

## Safety

- If you grow herbs or other edibles, use PETG (food-safe when printed) and consider sealing the inside with food-safe epoxy.
- PLA deforms above 55 degrees C; do not leave dark-coloured PLA pots in direct sun.
- Outdoor planters should be ASA or PETG for UV and moisture resistance.

## FAQ

**Is it free?**
Yes, with no account. A short ad may be shown before a download.

**Can I print it in vase mode?**
Yes. Set the wall thickness to about 0.4 mm for a 0.4 mm nozzle and turn on vase mode in your slicer for a fast, watertight single-wall pot.

**How accurate is the soil volume?**
It is the geometric volume of the inner cavity above the bottom plate. Real soil settles, so leave 10 mm of headroom.

**Do I need supports?**
Only if the overhang warning fires. A pot that narrows towards the top prints cleanly upright without supports.

## Parameters

| key | label | type | range / values | default | agents |
|---|---|---|---|---|---|
| `shape` | Shape | string | round|square|hexagon|octagon|polygon | "round" | yes |
| `sides` | Sides | integer | 3–12 count (step 1) | 5 | yes |
| `height` | Height | number | 20–250 mm (step 1) | 100 | yes |
| `topSize` | Top size | number | 20–240 mm (step 1) | 100 | yes |
| `bottomSize` | Bottom size | number | 20–240 mm (step 1) | 80 | yes |
| `wallThickness` | Wall thickness | number | 0.4–6 mm (step 0.2) | 2.4 | yes |
| `bottomThickness` | Bottom thickness | number | 1–10 mm (step 0.5) | 3 | yes |
| `twist` | Twist | number | -180–180 deg (step 5) | 0 | yes |
| `rimStyle` | Rim | string | none|lip|rolled | "none" | yes |
| `rimWidth` | Rim width | number | 1–15 mm (step 0.5) | 4 | yes |
| `rimHeight` | Rim height | number | 1–15 mm (step 0.5) | 4 | yes |
| `ribs` | Ribs | integer | 0–24 count (step 1) | 0 | yes |
| `ribMode` | Rib mode | string | groove|protrude | "groove" | yes |
| `ribDepth` | Rib depth | number | 0.3–6 mm (step 0.1) | 2 | yes |
| `ribWidth` | Rib width | number | 1–10 mm (step 0.5) | 3 | yes |
| `drainHoles` | Drainage holes | integer | 0–9 count (step 1) | 1 | yes |
| `drainHoleDiameter` | Hole diameter | number | 2–20 mm (step 0.5) | 8 | yes |
| `centreHole` | Centre hole | integer | 0|1 | 0 | yes |
| `centreHoleDiameter` | Centre hole diameter | number | 2–20 mm (step 0.5) | 6 | yes |
| `feet` | Feet | string | none|three|four|raised-base | "none" | yes |
| `footHeight` | Foot height | number | 1–20 mm (step 0.5) | 5 | yes |
| `saucerEnabled` | Add saucer | integer | 0|1 | 0 | yes |
| `saucerHeight` | Saucer height | number | 5–40 mm (step 1) | 12 | yes |
| `saucerClearance` | Saucer clearance | number | 0.5–10 mm (step 0.5) | 1 | yes |
| `printMaterial` | Print material | string | petg|pla|asa | "petg" | yes |
| `resolution` | Resolution | integer | 16–128 count (step 8) | 64 | yes |
| `color` | Preview colour | string | string | "#b5602a" | yes |
